oreotiger.blogg.se - Juniper srx

#JUNIPER SRX INSTALL#

Set routing-options static route 10.147.40.0/23 install There is default route to public network gateway. Add the specific routes to differentiate private and public traffic. Set security policies from-zone trust to-zone trust policy accept-all then permitĥ. Set security policies from-zone trust to-zone trust policy accept-all match application any Set security policies from-zone trust to-zone trust policy accept-all match destination-address any Set security policies from-zone trust to-zone trust policy accept-all match source-address any Allow traffic from trust zone to trust zone Set security zones security-zone untrust interfaces fe-0/0/4.52Ĥ. Set security zones security-zone untrust host-inbound-traffic system-services ping Set security zones security-zone untrust host-inbound-traffic system-services ssh Set security zones security-zone trust interfaces fe-0/0/0.0 Set security zones security-zone trust host-inbound-traffic system-services all Set interfaces fe-0/0/4 unit 52 family inet address 10.147.52.3/24ģ.2 Create untrust zone for public networkģ.3 Add management interface trust zone and public interface to untrust zone. Set interfaces fe-0/0/4 unit 52 family inet sampling output Set interfaces fe-0/0/4 unit 52 family inet sampling input Set interfaces fe-0/0/4 unit 52 vlan-id 52 Set interfaces fe-0/0/4 description “Public Network” Set interfaces fe-0/0/1 description “Private network” Set interfaces fe-0/0/0 description “Management Interface” Public Interface – fe-0/0/4.52 where 52 is the public VLAN Set system services web-management https interface vlan.0Ĭhoose three interfaces in the srx device. Set system services web-management https system-generated-certificate Set system services web-management http interface fe-0/0/0.0 Set system services web-management http interface vlan.0 Set system root-authentication encrypted-password “$1$ucpHjRfH$dNkhOuzKXJxrpAtewvTu.1” This configuration is not part of the cloudstack orchestration job. This configuration has to done by the admin. Add SRX into cloudstack Preconfigure SRXīelow explained physical device external firewall SRX configuration.

NetScaler Application Delivery ManagementĪdding SRX into Cloudplatform has two steps:Ģ.

NetScaler App Delivery and Security Service.

# set snmp community public clients 0.0.0. # set snmp community public clients 10.0.0.0/8 # set snmp location lab # set snmp contact " " # set snmp community public authorization read-only # set security zones security-zone trust interface ge-0/0/0.0 host-inbound-traffic system-services snmp

Click OK, Apply, and then Commit to commit changes.

Add snmp, as well as http and https so you don’t lose access to J-Web.

For Host Inbound Traffic under System Services, click Allow Selected Services.

In the Interfaces Configuration list, click ge-0/0/0.0 and click Edit.

Navigate to Configure > Security > Zones.Click OK and Apply to apply the settings.In the Authorization list, set read-only.Click Add under Communities and add a community string.In J-Web, navigate to Configure > Services > SNMP.You can configure SNMP within the web browser, or the command line interface on your SRX hardware: Monitoring your Juniper SRX devices is simple, just enable SNMP on your device and set the proper SNMP community when adding it to LogicMonitor.